Schuchl Products
|
|
Back to the top
 |
|
Vacuum - Stirring System URM - 400
|
Vacuum stirring system URM - 400, infinitely variable mixer speed,
extremely strong stirrer, digital vacuum display, vacuum regulating valve.
1 container 30 litres with quickness holder and mixer
1 container 10 litres with quickness holder and mixer
1 container 3 litres with quickness holder and mixer |
|
|
Back to the top
|
|
Vacuum Wax Casting Machine |
For specific tasks we produce special machines
Vacuum casting machine with a specific wax container, which heats up to
150 °C. About a handle we the separately heatable nozzle pin opened. To
set in through combined from aeration valve and ball valve wax can be
pressed in into the form also by means of pressure difference.
Comfortable automatic controller with colour monitor to adjust the
temperatures of kettle, nozzle and cylinder, digital vacuum display etc.
Pneumatic stirrer
As an option you can combine it with toppling cup and stirrer, the same as UHG - 500 Easy
|
|
|
Back to the top
|
Kern 440 Series
|
|
|
This is the ideal entry-level
model for all laboratory technicians
There will hardly be better value for money in this performance class!
Many multiple functions are here at users disposal.
E.g. you can use it for parts counting and also for weighing different
mixtures.
Because of the 4-key pad it is really uncomplicated.
It is so easy to weigh:
Press ON key - zero digit appears - place product - read the digital weight
Protective working cover and adjusting weight is supplied as standard.
Total balance WxDxH 165 x 230 x 80 mm.
Stabilization time approx. 3 sec, permissible ambient temperature +10°C ...
+30°C,
Mains adapter 230 V as standard B
Battery 9 V (not supplied as standard).
Click here to
download the Kern 440 Series Operating instructions
Click here to download the Kern
440 Series Brochure |
|
|
Back to the top
|
|
Differential Pressure Casting System |
A mould can be filled with the
compression funnel in simple way under compression. Even expensive vacuum
casting installations with compression difference option exceed the
advantages.
Problem free cast of high viscous casting materials
More rapid mould fill
Little rework through smaller feeder and riser
Most complicated designs and thin walled coating cast are without problems
feasible
Favourable purchase price
To add on all vacuum casting installations (also rival installations)
Conversion of the casting installation in a few seconds
Click here for
download more information on Differential Pressure System |
Easy mounting Schuchl Machines
|
UHG-400
|
Mounted in seconds through quick clutch changes.
The flange with the quick clutch change remains at the chamber
mounted.
|
|
Subsequent mounting about machine flange of everyone to carry out
(2).
The quick clutch clutch built-in of us (1) are convenient. These
avoid cable hanging crossways through the chamber.
|
|
For all vacuum casting machines fitting flanges and adapters are
available
|
|
Heating Cup
|
Heating cup 3 Litre and 1 Litre
|
-
Problem-free mounting through our machine flanges
-
Addition at all vacuum casting machine greater than model 500
-
Conversion of the vacuum casting machine in few minutes
-
Cup change in a few seconds.
|
|
Order - no .
|
Marking
|
|
222-B050 0SM
|
Silicon mixer:
Simple stir from greater amounts silicone through two
counter rotating mixers.
Connection to every drilling machine with screwing chuck with
enclosed special mother.. (without drilling machine) |
|
222-0135 0KS
|
Plastic - cutter:
length 135 mm |
|
222-0160 0KS
|
Plastic - cutter:
length 160 mm |
|
222-0180 0KS
|
Plastic - cutter:
length 180 mm |
|
222-G160 0KS |
Plastic - cutter:
length 160 mm, 45° |
|
222-0250 0KS
|
Plastic - cutter:
length 250 mm |
|
|
Scalpels and blades:
5 different scalpels and many different blades stand for the
selection.
List also in the download area |
|
222-00BF 0DZ
|
Expanding tool:
To open the mould. Type BF |
|
222-00ST 0DZ
|
Expanding tool:
To open the mould. Type Standard |
|
222-2023 LFT
|
Lift with hand wheel:
200 x 230 mm |
|
222-0020 STR
|
Twinge tubes to prick from ventilation into silicone:
Outside diameter 2,00 mm |
|
222-0025 STR
|
Outside diameter 2,50 mm |
|
222-0030 STR
|
Outside diameter 3,00 mm |
|
222-0035 STR
|
Outside diameter 3,50 mm |
|
333-2405 WAX
|
Release spray wax |
|
333-2406 SIL
|
Release spray silicon |
Back to the top
|