Reptech Products

 

Moldsil Repflex Adsil
Repsil Film & Special FX  

 

Moldsil

 

Back to the top

MOLDSIL is a high quality silicone moulding compound developed for the FIBROUS PLASTER AND RESIN CASTING INDUSTRIES. Moulds made from MOLDSIL will give high quality reproduction and a long mould life with virtually no shrinkage and no risk of the plaster ever gripping to the mould surface. MOLDSIL has been designed to be easy to mix by hand with colour-coded components to offer a visual aid to ensure mixing is complete. The two components mix easily and because of it’s low viscosity MOLDSIL can be used without the use of a vacuum chamber. MOLDSIL comes in three grades: slow, fast and very fast, giving you a choice in how quickly you wish to have a finished mould in production. MOLDSIL can also be used with Silastic Thixotropic additive only enabling you to make skin moulds or to mould on site.

There is also softer grade of MOLDSIL available called MOLDSIL SOFT and a harder grade called MOLDSIL HARD.

 

 
Simple Guide To Moldsil Usage and Curing Properties Table
 Click here for Moldsil Base Product Safety Data Sheet
Click here for Moldsil Soft Base Product Safety Data Sheet
Click here for Moldsil 'S' Catalyst Product Safety Data Sheet
Click here for Moldsil 'F' Catalyst Product Safety Data Sheet
Click here for Moldsil 'VF' Catalyst Product Safety Data Sheet

 

 

Repflex

 

Back to the top

Repflex Flexible Polyurethane is a high quality moulding compound for use in the concrete industry. It can be used to reproduce items in wet-cast or semi-dry concrete. Repflex 35 is a medium hardness grade of low viscosity which can be used without the need of a vacuum chamber. Repflex products are moisture sensitive.

 

 
Simple Guide to Repflex Usage and Curing Properties Table

 

 

Adsil

 

Back to the top

A range of own brand addition cure silicones.
 
Adsil 30P

ADSIL 30P (Premium) is an addition-curing RTV Silicone mouldmaking rubber that has been developed specifically for the production of case moulds used for the production of plaster parts.
ADSIL 30P is characterised by good strength, extremely high elongation and long term stability. 

Click here for Adsil 30 P Usage and Properties Table
Click here for Adsil 30 P Part A Product Safety Data Sheet
Click here for Adsil 30 P Part B Product Safety Data Sheet

 
Adsil 25P

ADSIL 25P (Premium) is an addition-curing RTV Silicone mouldmaking rubber that has been developed specifically for the production of case moulds used for the production of plaster parts.
ADSIL 25P is characterised by low viscosity, excellent flow, good strength, extremely high elongation and long term stability.

Click here for Adsil 25 P Usage and Properties Table
Click here for Adsil 25 P Part A Product Safety Data Sheet
Click here for Adsil 25 P Part B Product Safety Data Sheet

 
Adsil 20P

ADSIL 20P (Premium) is an addition-curing RTV Silicone mouldmaking rubber that has been developed specifically for the production of case moulds used for the production of plaster parts.
ADSIL 20P is characterised by low viscosity, excellent flow, good strength, extremely high elongation and long term stability.

Click here for Adsil 20 P Usage and Properties Table
Click here for Adsil 20 P Part A Product Safety Data Sheet
Click here for Adsil 20 P Part B Product Safety Data Sheet

 
Adsil 51-38B/D

ADSIL 51-38 Is an addition-curing opaque RTV Silicone mouldmaking rubber that has been developed specifically for the production of rapid prototyping and other moulds used for the casting of polyurethane, epoxy and polyester resin parts, where a translucent grade is not necessary and where mould life is a major consideration.

B = Oil Bleed Grade     D = Dry Grade

 Simple Guide to Adsil 51-38 Usage and Properties Table
 Click here for Adsil 51-38 Part A Product Safety Data Sheet
 Click here for Adsil 51-38 Part B Product Safety Data Sheet

 
Adsil 51-40B/D

ADSIL 51-40 is an addition-curing translucent RTV Silicone mouldmaking rubber that has been developed specifically for the production of rapid prototyping and other moulds used for the casting of polyurethane, epoxy and polyester resin parts.

B = Oil Bleed Grade     D = Dry Grade

 Simple Guide to Adsil 51-40 Usage and Properties Table
 Click here for Adsil 51-40 Part A Product Safety Data Sheet
 Click here for Adsil 51-40 Part B Product Safety Data Sheet

 
Adsil 51-48B/D

ADSIL 51-48 Is an addition-curing translucent RTV Silicone mouldmaking rubber that has been developed specifically for the production of rapid prototyping and other moulds used for the casting of polyurethane, epoxy and polyester resin parts. Adsil 51-48 is particularly recommended for use in the production of castings by the RIM method.

B = Oil Bleed Grade     D = Dry Grade

 Simple Guide to Adsil 51-48 Usage and Properties Table
 Click here for Adsil 51-48 Part A Product Safety Data Sheet
 Click here for Adsil 51-48 Part B Product Safety Data Sheet

 
Adsil 51-80B/D

ADSIL 51-80 Is an addition-curing RTV Silicone Rubber that has been developed specifically for the production of rapid prototyping and other moulds used for the casting of polyurethane, epoxy and polyester resin parts. Adsil 51-80 is particularly recommended for use in the production of castings by the RIM method where parts are not too complex and where extreme dimensional tolerances must be achieved.

B = Oil Bleed Grade     D = Dry Grade

 Simple Guide to Adsil 51-80 Usage and Properties Table
 Click here for Adsil 51-80 Part A Product Safety Data Sheet
 Click here for Adsil 51-80 Part B Product Safety Data Sheet

 
Adsil Case Grade ADSIL CASE GRADE is an addition-curing RTV Silicone mouldmaking rubber that has been developed specifically for the production of case moulds used for the production of plaster moulds used in the production of ceramic tableware.

 Simple Guide to Adsil Case Grade Usage and Properties Table
 Click here for Adsil Case Grade Part A Product Safety Data Sheet
 Click here for Adsil Case Grade Part B Product Safety Data Sheet

 
Adsil Dripad Oil Information regarding this product to follow shortly on this site. Please contact us if you require the information now.

 
Adsil Pad Grade

ADSIL PAD GRADE is an addition-curing RTV Silicone rubber that has been developed specifically for the production of pads used in Tampo Pad Printing.

 Simple Guide to Adsil Pad Grade Usage and Properties Table
 Click here for Adsil Pad Grade Part A Product Safety Data Sheet
 Click here for Adsil Pad Grade Part B Product Safety Data Sheet

 
Adsil Release Agent Concentrate ADSIL RELEASE AGENT CONCENTRATE is a sealer to seal damp or dry plasterwork prior to using addition cure silicone.

Simply Guide to Adsil Release Agent Concentrate Usage
Click here for Adsil Release Agent Concentrate Product Safety Data Sheet

 

 

Repsil

 

Back to the top

REPSIL E range of silicones is a group of quality silicone moulding compounds developed to give the maximum ECONOMY in terms of price while maintaining and providing high quality reproduction, long mould life, very low shrinkage and no risk of the casting material gripping the mould surface.
 
Simple Guide to Repsil E Range Usage and Curing Properties Table
 Click here for Repsil E Base Product Safety Data Sheet
 Click here for Repsil E15 Catalyst Product Safety Data Sheet
 Click here for Repsil E20 Catalyst Product Safety Data Sheet
 Click here for Repsil E25 Catalyst Product Safety Data Sheet
 Click here for Repsil E30 Catalyst Product Safety Data Sheet

 

 

Film & Special FX

 

Back to the top


 
Repsil T

Repsil-T is a translucent, high strength, two-part component, tin catalysed, and room temperature curing silicone rubber. It is designed as a 14 Shore A very pourable rubber providing excellent long library life and accurate detail reproduction. Repsil - T may be easily pigmented which makes it ideal for robotic animatronic skins, special effect skins and props for theme parks.

 Simple Guide to Repsil T Usage and Properties Table
 Click here for Repsil T Base Product Safety Data Sheet
 Click here for Repsil T Catalyst Product Safety Data Sheet

 
Repsil T Softener Used to soften Repsil T. Specially formulated to reduce leaching of fluids. Can be added at varying levels, up to 200% of base rubber. The larger the percentage added the slower the setting time; so the addition of 81VF accelerator is recommended to speed up the cure time.

 
Orange Solvent A safer type of de limonene containing a stabiliser to prevent oxidisation which can be an irritant when in contact with skin. Used as a paint base for diluting 732 or AO7 when painting onto Repsil T Skins.

 Click here for the Orange Solvent Safety Data Sheet

 
Reptech AO7 A sealant that when diluted in orange solvent enables you to adhere paints to all types of silicone skins, especially addition cured systems. Ideal where very fast drying times are needed.

Click here for Reptech A07 Product Information Sheet
Click here for Reptech A07 Product Safety Data Sheet

 
732 Sealant Used as a paint base when diluted with orange solvent for painting onto Repsil T skins. Oil-based paints work best when added to the diluted mixture. Add 10% of 732 to the orange solvent and allow 2-3 hours to dissolve before painting or spraying onto the silicone surface.

 Click here for 732 RTV Adhesive Sealant Product Information Sheet
 Click here for 732 RTV Adhesive Sealant Product Safety Data Sheet

 
734 Sealant Thinner version of 732

Click here for 734 RTV Adhesive Sealant Product Information Sheet
Click here for 734 RTV Adhesive Sealant Product Safety Data Sheet

 

Back to the top